H2O FAQ

How much will we reduce water expenses using the H2O Intelligent Water Management System?
Most clients see an immediate savings reduction between 10-30% and water usage by 6-9% The results vary by water pressure from the city water supply and size of the installed H2O WAVE Water Valve.
How do I know if I have air bubbles in the water coming into my facility?

There are many ways air gets into the water supply as it travels though the pipes from your water supplier. Although water providers try to prevent outside air infusion, air is drawn into the water line in many ways such as during common main line breakages, pumps along the water line, small cracks or damaged joint seals and changes in temperature.

 

Read more at
https://intellegent-water.premierbeautybrands.com/air-in-water

 

Most water meters measure volume passing through the meter so you are billed for the volume of water plus the air. The H2O WAVE Water Efficiency Valve compresses the air in the pipe as it goes through the meter so you are billed only for water, not water plus air bubbles. This results in up to 30% reduction in water costs.

 

See how it works at: 

https://intellegent-water.premierbeautybrands.com/air-in-water

Do we need a permit or permission from the city?
No. Your WAVE Water Valve is installed on the property side of the meter.
What are the available sizes fo the H2O WAVE Valve?
The WAVE Valve is manufactured in the following sizes, plus metric sizes, from 1″ to 16″ We can also build custom WAVE Valves in sizes up to 36 inches
How long does the H2O system installation take?
The H2O Intelligent Water Management System is typically installed in under an hour per valve, and many times in only 30 minutes. Installation can be scheduled during hours that don’t interrupt your schedule or business.
Can I install the H2O system myself?

Yes, however H2O recommends a licensed plumber or mechanical contractor install the system. H2O has a team of licensed, certified installers available to install it for you.

Will there be a noticeable loss in water pressure after the system is installed?
The water coming from the city is often over-pressurized, causing you to use more water than necessary. Lower water pressure is desirable and typically not enough that guests or customers notice. In most instances the pressure drop is between 6 to 8 psi.
How will I know the H2O system is working?
You will know the H2O Water Management System is working because you’ll see an immediate reduction in your volume usage, and a lower water bill.
Where is the H2O technology made?
The H2O System, including the patented WAVE Water Efficiency Valve, is manufactured in the USA.
Scroll to Top